Functions Of Various Parts - SATO MB400i Operator's Manual

FUNCTIONS OF VARIOUS PARTS

RS-232C Interface
Label guide
RS-232C cover
Label guide stopper
Cover
Cover
Open/Close lever
Label output area
Tear-off bar
Label Width
Markings
IrDA filter
DC input jack
DIP Switch
Cover for DC input
jack
Dispenser unit
FEED button
POWER button
PRINT button
Battery cover
Status LED
Battery life indicator
(LED)
MB400i/MB410i Operator Manual
Allows connection to a computer or handy terminal
Set to meet the size of the label used
Protects the RS-232C connector from dust and damage
Allows adjustment of the label guide to fit the width of an
installed label roll
Opens up to allow the installation of labels
Enables the user to releases the cover, or to lock the cover shut
This is the area where the printed label is output
Allows an easy tear position for perforated backing between
labels
Indicates the width of label installed or in use.
Contains the IrDA (infrared) sensor and emitter
Allows for connection to optional AC adapter, which supplies
direct current to the printer and charges battery.
Sets the operation mode of the printer. (See Enabling and
Disabling Special Functions in the Operating Modes section.)
Protects the DC input terminal and DIP switch from dust and
damage
Moved to select Dispense mode
Press to feed label
Allows the user to turn ON/OFF the printer
Takes the printer Online or Offline
Cover for special battery pack
Indicates the status of the printer. (See Other Printer Modes in
Section 4: Operation and Configuration, and the tables in the
Troubleshooting Section of this manual.)
Three LEDs indicate the amount of battery power remaining for
the printer. (See Table: Hardware and Related, in the row:
Indicators in Section 1 of this manual, Technical Data.)
Unit 3: Setup
Page 3-5