Setting The Presentation Timer - BenQ MX766 User Manual

Setting the presentation timer

The presentation timer can indicate the presentation time on the screen to help you
achieve better time management when giving presentations. Follow these steps to utilize
this function:
1. Go to the SYSTEM SETUP: Basic > Presentation Timer menu and press
MODE/ENTER to display the Presentation Timer page.
2. Highlight Timer Period and decide the timer period by pressing
of time can be set from 1 to 5 minutes in 1-minute increments and 5 to 240 minutes
in 5-minute increments.
3. Press to highlight Timer Display and choose if you want the timer to show up
on the screen by press
Selection
Always
1 Min/2 Min/3 Min
Never
4. Press to highlight Timer Position and set the timer position by pressing
Top-Left
5. Press to highlight Timer Counting Direction and select your desired counting
direction by pressing
Selection
Count Up
Count Down
6. Press to highlight Sound Reminder and decide if you want to activate sound
reminder by pressing
the last 30 seconds of counting down/up, and a triple beep sound will be produced
when the timer is up.
7. To activate the presentation timer, press
MODE/ENTER.
8. A confirmation message displays. Highlight Yes and press MODE/ENTER to
confirm. You will see the message "Timer is On" displaying on the screen. The
timer starts counting at the time the timer is on.
To cancel the timer, perform the following steps:
SYSTEM SETUP: Basic
1. Go to the
Off.
Press MODE/ENTER. A confirmation message displays.
2. Highlight Yes and press MODE/ENTER to confirm. You will see the message
"Timer is Off!" displaying on the screen.
ing / .
Description
Displays the timer on screen throughout the presentation time.
Displays the timer on screen in the last 1/2/3 minute(s).
Hides the timer throughout the presentation time.
Bottom-Left Top-Right
/ .
Description
Increases from 0 to the preset time.
Decrease from the preset time to 0.
/ . If you select On, a double beep sound will be heard at
http://www.pureglare.com.au
Bottom-Right
and press / to select On and press
> Presentation Timer menu and highlight
/ . The length
/
.
43
Operation