BenQ MX766 User Manual page 91

Hide thumbs Also See for MX766:
Table of Contents

Advertisement

3.
Remove the lamp cover by (a) sliding
the cover toward the side of the
projector and (b) lifting it off.
Do not turn the power on with the lamp
cover removed.
Do not insert your fingers between the
lamp and the projector. The sharp edges
inside the projector may cause injuries.
4.
Loosen the screws that secure the
lamp.
5.
Lift the handle so that it stands up. Use
the handle to slowly pull the lamp out
of the projector.
Pulling it too quickly may cause the lamp to
break and scatter broken glass in the
projector.
Do not place the lamp in locations where
water might splash on it, children can reach
it, or near flammable materials.
Do not insert your hands into the projector
after the lamp is removed. If you touch the
optical components inside, it could cause
color unevenness and distortion of the
projected images.
6.
Insert the new lamp into the lamp
comparent and make sure it fits in the
projector.
(a)
http://www.pureglare.com.au
(b)
Maintenance
91

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mw767Mx822st

Table of Contents