BenQ MX766 User Manual page 85

FUNCTION DESCRIPTION
AMX Device Discovery
Selecting On the projector can be detected by AMX controller.
Network Settings
Mac Address
Show Mac address.
Returns all settings to the factory preset values.
Reset All Settings
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the PICTURE menu.
Resolution
Shows the native resolution of the input signal.
Lamp Mode
Shows the current lamp mode.
Current System
Status
3D Format
Shows the current 3D mode.
Color System
Shows input system format, NTSC, PAL, SECAM, or RGB.
Equivalent Lamp
Displays the number of hours the lamp has been used.
Firmware Version
Shows firmware version.
The following settings will still remain: Position, Phase, H. Size,
User 1, User 2, Language, Projector Position, High Altitude
Mode, Security Settings, Baud Rate.
http://www.pureglare.com.au
85
Operation