Optional Stereo Receiver Functions - Jacuzzi J - 2 0 Owner's Manual

J-200 Series
17.0

optional stereo receiver Functions

1
8 9 10
J-230, J-270 and J-280 Models only:
To start enjoying your new stereo receiver, please read the following
operation instructions in their entirety.
1. power Button: Press PWR (Power) to turn deck on or off.
2. equalization Button: Repeatedly press EQ/LD to choose from DSP
Off, Jazz, Pop, Classic, Rock or Vocal equalization options. Press
and hold EQ/LD for 2 seconds to enable or disable the "LOUD"
function.
special recommendation: After you have powered up your Aquatic
AV Audio System, we suggest you try one of the preset DSP (digital
sound presets) settings to customize the sound in your spas audio
system. It's easy, simply press the EQ/LD button (2) to activate the
DSP. Then repeatedly press to choose from Jazz, Pop, Classical, Rock
and Vocal DSP settings. This will enhance your listening experience
and make it more enjoyable.
3. mute Button: Press Mute to mute audio output. Press again to
return to previous volume level.
4. open Button: Press Open to flip down the front access panel for CD
access. Gently insert CD into slot (DO NOT FORCE!) Make sure to
close the front panel to prevent damage to the unit.
note: Never insert a wet or moist CD since it may damage the
mechanism and void the manufacturer warranty.
5. a/Ps button: Press A/PS to scan station presets. The tuner will
scan up, wait for a few seconds, then continue. Once a desired
station is found, press A/PS a second time to cancel scan. To
48
2 3
11 12
4 5
13 14 15
6 7
16 17