Configuring the WAP200 Access Point
Verifying Access Point Status
STEP 1
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster
Checking System Performance
The Status > System Performance window displays the access point's status
information for its current settings and data transmissions.
To check system performance of the access point, follow these steps:
Click Status > Systems Performance.
This page displays the access point's system performance values:
•
Wired
The statistics for the wired network, the LAN.
-
Name—Network to which the statistics refer, i.e. the LAN.
-
IP Address—Access point's local IP address.
-
MAC Address—MAC Address of the access point's wired interface.
-
Connection—Status of the access point's connection for the wired
network.
6
72