Cisco WAP200 Administration Manual page 57

Configuring the WAP200 Access Point
Configuring the Access Point's Modes of Operation
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster
You may wish to change the access point's mode of operation if you want to use
the access point as a wireless repeater to extend the range of your wireless
network. When set to the Wireless Repeater mode, the wireless repeater is able
to talk to a remote access point within its range and retransmit its signal.
Desktop
WAP200
Access Point
Wireless Repeater
Mode
WAP200
Access Point
Wired LAN
Internet
Laptop
Desktop
Laptop
Switch
Modem
6
51