Rebooting The Access Point - Cisco WAP200 Administration Manual

Configuring the WAP200 Access Point
Configuring Administration Settings
STEP 2
STEP 1
STEP 2
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster
d. Enter the location of the firmware upgrade file in the field provided or click
Browse to locate the file.
e. Click Upgrade and follow the on-screen instructions.
Restore your custom settings as described in
Configuration," on page

Rebooting the Access Point

The Administration > Reboot window allows you to reboot the access point.
To reboot the access point, follow these steps:
Click Administration > Reboot.
This feature is useful when you need to remotely reboot the access point.
Click Reboot.
"Managing the Access Point's
68.
6
67