Cisco WAP200 Administration Manual page 34

Configuring the WAP200 Access Point
Configuring Wireless Settings
STEP 3
STEP 4
STEP 5
STEP 6
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster
Wireless isolation between SSIDs prevents eavesdropping on the network. When
it is enabled, wireless frames received on this access point are not forwarded to
other wireless networks (SSIDs).
This feature is very useful when setting up a wireless hotspot location, for
example, to keep its wireless network (SSID) isolated from your other wireless
networks (SSIDs). This is a global option applying to all SSIDs. The default is
Enabled.
To disable wireless security completely, from the Security Mode drop-down
menu, select Disabled.
To enable wireless security, from the Security Mode drop-down menu, select one
of the following security modes, and enter the information needed for that
particular mode, as described in one of the following sections:
• Configuring WPA-Personal, page 29
• Configuring WPA2-Personal, page 30
• Configuring WPA2-Personal Mixed, page 31
• Configuring WPA-Enterprise, page 33
• Configuring WPA2-Enterprise, page 35
• Configuring WPA2-Enterprise Mixed, page 37
• Configuring RADIUS, page 39
• Configuring WEP, page 41
To prevent wireless computers associated to the same SSID from seeing each
other and transferring files between each other, from the Wireless Isolation
(within SSID) drop-down menu, select Enabled.
The default is Disabled which allows visibility and the exchanging of files between
wireless computers associated with the same SSID.
Click Save.
6
28