Technical Data - Rangemaster 110 Gas User's Manual & Installation Instructions

9. Technical Data

This cooker is designed for use on either:
• Natural gas (Cat I 2H ) at 20 mbar or
• LP gas (Cat I 3+ ) Butane 29 mbar / Propane 37 mbar
NOTE: The natural gas and LP gas versions of these cookers are different models and CANNOT be converted from one gas
family to the other.
INSTALLER: Please leave these instructions with the user.
DATA BADGE LOCATION: Cooker back, serial number repeater badge below oven door opening.
COUNTRY OF DESTINATION: GB, IE.
Connections
Gas (Rp ½ at rear right-hand side)
Natural gas
Butane
Propane
See the appliance badge for test pressures.
Dimensions
Overall height
Overall width
Overall depth
Minimum space above the hotplate
Refer to 'Positioning the Cooker' .
Ratings
Hotplate
Large burner
Medium burner
Small burner
Grill
Ovens
Warmer
Maximum total electrical load at 230 V (approximate total including oven lights, oven fan, etc.): 0.26 kW.
Bypass Screw
40
32
28
88
N/A
20 mbar
29 mbar
37 mbar
minimum 905 mm
600 mm (to fascia); 650 mm (over handles)
Natural Gas 20 mb
Injector
3.0 kW 134
1.7 kW 109
1.0 kW 75
2.73kW 190
2.5kW 115
29
DocNo.101-0010 - Technical data - 110 Gas - RM lidded
Electric
230 / 400 V 50 Hz
maximum 930 mm
1100 mm
650 mm
L.P. Gas
3.0 kW (210 g/h)
1.7 kW (119 g/h)
1.0 kW (70 g/h)
2.73kW (192g/h)
2.5kW (175g/h)
0.16 kW
Injector
87
68
51
85
76