Assembly; Assembling The Detector - Bounty Hunter Lone Star Pro Owner's Manual

ASSEMBLING THE DETECTOR

G
1 Hold S-ROD upright.
G
2 Insert LOWER STEM into S-ROD
and click SILVER BUTTON into a
hole.
G
3 Attach the SEARCHCOIL to the
LOWER STEM using the BOLT
and KNURLED KNOB.
G
4 Adjust the LOWER STEM to a
length that lets you maintain a
comfortable upright posture while
holding the detector relaxed at
your side with the SEARCHCOIL
parallel to the ground in front of
you.
G
5 Wind the CABLE around the
STEM.
Leave slack in the cable at the
bottom to allow the searchcoil to
pivot.
G
6 Align the pins on the CABLE
PLUG to the connector holes on
the rear of the control housing.
G
7 Push in CABLE PLUG.
5