Controls; Headphones - Bounty Hunter Lone Star Pro Owner's Manual

CONTROLS

Press
cycles to a new category and that category icon will flash
for 2 seconds. Then the category will reverse status. If the icon
had previously been illuminated it will now disappear indicating
that the category has been eliminated from detection. Likewise,
an icon that is not visible on the display will re-illuminate,
indicating that this category is now "Notched in" (i.e. detected).
Use to select the category to NOTCH. Each time you
press
screen. Any of the 4 categories can be "Notched" in or out. After
the category icon flashes and times out, the Notch status will
change.
HEADPHONE JACK
This detector has a 1/4" headphone
jack. It works with any stereo
headphone that has a 1/4" plug.
When the headphone
connected, speaker
disabled.
USING HEADPHONES
Using a detector with headphones
facilitates detection of the weakest
signals and also extends battery life.
It also allows you to hear subtle
changes in the sound more clearly,
particularly if searching in a noisy
location. For safety reasons, do not use headphones near traffic or where other
dangers are present. This device is to be used with interconnecting
cables/headphone cables shorter than three meters.
to program the NOTCH feature. Each press of
the category for metal to be notched flashes on the
jack
volume
is
is
15