Table of Contents
Advertisement
ASSEMBLY
Assembly is easy and requires no tools.
G
1
Position the lower stem (the straight
tube) with the silver button toward the
back.
Using the bolt and knurled knob,
attach the searchcoil to the
plastic
protruding from the
lower stem.
G
2
Press the button
on the upper end
of the lower stem,
and slide the lower
stem into the upper
stem.
Adjust the stem to a length
that lets you maintain a
comfortable
posture, with your arm relaxed at your side, and the
searchcoil parallel to the ground in front of you.
G
3
Wind the cable securely around the stem.
G
4
Insert the plug into the
matching connector on
the right underside of the
detector body. Be sure
that the key-way
pins line up correctly.
Caution:
Do not force the
plug in. Excess
force will cause
damage.
To disconnect the
cable, pull on the
plug.
Do not pull
on the cable.
4
extension
upright
and
Advertisement
Table of Contents
