The Device Service Settings Window - Jabra PC Suite User Manual

Figure 1: The Jabra icon in the Windows Notification Area
If you think that the Device Service is running but you cannot see the icon, then
Windows may be hiding it. Click on the small left-pointing arrow at the left side
of the Notification Area to view all available icons, which should include the
Jabra icon. If the icon is still not visible, then the service is not running; launch it
from the Start menu and/or add it to your Startup folder as described above.
The Jabra icon enables you to open a settings window for the service and also
enables you to quit the service. To view these options, right-click on the icon in
the Notification Area to open its context menu.
Figure 2: The Jabra Device Service context menu
The following commands are available here:
•
Jabra Control Center
various options on your Jabra device. See "The Jabra Control Center" on page
19 for details about this program. You can also activate the Jabra Control
Center menu item by double-clicking on the Jabra icon (which is why it is
shown in bold type).
•
Jabra Device Service
below).
: Quits the Device Service. This will remove the Jabra icon from your
•
Exit
Notification Area and terminate the Jabra Control Center and Jabra softphone
interfaces. You can run the Device Service again at any time by selecting its
icon from the Windows

The Device Service Settings Window

The Jabra Device Service window enables you to set options for the Device
Service. You can open this window at any time when the Device Service is
running by using the Jabra icon in the Windows Notification area, as described
above.
Jabra PC Suite User's Guide
: Opens the Control Center, which you can use to set
: Opens the settings window for the Device Service (see
-button menu, as described above.
Start
Chapter 4: The Jabra Device Service
The Device Service Settings Window
13