Jabra Elite 2 - Earbuds Manual

Welcome

Jabra Elite 2 features

• Customizable music and powerful bass on the go.
• 2-mic technology for clear calls.
• Sleek Danish design & comfortable fit.
• Up to 7 hours battery in the buds, with a total of 21 hours with the case.
• Engineered for noise-isolation.
• IP55-rated rainproof protection, plus 2-year warranty*.
• Alexa** on tap. Tap to ask Alexa, plus one-touch Spotify playback***.

* Against failure from dust and water with Jabra Sound+ app registration

** Alexa voice assistant and features only available for Android devices version 6.0 or higher

*** Instant Alexa activation and one-touch Spotify playback compatible with Android only

Jabra Elite 2 overview

Included accessories

How to wear

Carefully insert each earbud into your ear. Position the microphone on the right earbud towards your mouth.

Changing EarGels

For the optimal audio experience, it is recommended to try each of the different EarGel sizes. The fit should feel light and comfortable in your ear. The medium EarGels are pre-mounted on the earbuds.

How to charge

The Jabra Elite 2 offers up to 7 hours of battery and up to 21 hours with the charging case and fast charge.

Charging the earbuds

Place the earbuds in the charging case and close the lid. It takes up to 2 hours to fully recharge the earbuds.

When the earbuds are removed from the charging case, the LEDs on the earbuds will light up red, yellow or green to indicate the battery status of the earbuds. The LED on the front of the charging case indicates the battery status of the charging case.

Fast charge the earbuds

Placing the earbuds in the charging case for 10 minutes when they are at low battery will fast charge the earbuds, offering up to 60 minutes of battery. Fast charging the earbuds requires that the charging case has a minimum of 30% battery.

You can see the current battery status of the earbuds using the Jabra Sound+ app.

Charging the charging case using USB

Plug the supplied USB-C charging cable into the charging case and a USB-A power supply or certified wall charger. It takes up to 3 hours to fully charge the earbuds and the charging case (depending on the charger used)

It is recommended to use a power supply with 5V +-0.25V and maximum charging current below 2A. It is not recommended to charge the earbuds or charging case using a power supply with a higher voltage.

What the LEDs mean

How to pair

Pairing with a mobile device

1. Power on the earbuds by removing them from the charging case. Alternatively, press the Left and Right buttons to power the earbuds on.
2. Press and hold (3 sec) the Left and Right buttons simultaneously until the earbud LED flashes blue. The earbuds will now be ready to pair to your phone.
3. Go to the Bluetooth settings on your smartphone and select the Jabra Elite 2 from the list of available devices to complete the pairing.

How to use

Power the earbuds off/on

Place the earbuds in the charging case to power off. Remove the earbuds from the charging case to power on.

To manually power off the earbuds, press both the Left and Right buttons simultaneously, or press and hold (5 sec) the Left or Right button when in Mono mode.

To manually power on the left or right earbud, press the Left or Right button.

Music controls

Call controls

Voice assistant controls

Right button	Voice Assistant
	Activate Voice assistant (Siri, Google Assistant, Alexa*)	Double-press the Right button when not on a call

* Alexa voice assistant and features only available for Android devices version 6.0 or higher

One-touch Spotify playback

When configured using the Jabra Sound+ app, it is possible to control one-touch Spotify playback using the right earbud.

One-touch Spotify playback is off by default.

Right button	Spotify
	Resume last played Spotify song	Double-press the Right button when not listening to music or on a call
	Play Spotify recommended song	Double-press the Right button when Spotify is open

Mono earbud use

The right earbud can be used individually for music playback or for calls. To activate mono earbud mode, place the left earbud in the charging case.

Right button	Mono earbud use
	Play/pause music	Press the Right button when listening to music
	Answer call	Press the Right button
	End/Reject call	Double-press the Right button
	Mute/unmute microphone	Press the Right button when on a call
	Activate Voice assistant or one-touch Spotify playback	Double-press the Right button when not on a call
	Adjust volume	Use the volume controls on the paired mobile device

The left and right earbuds will automatically relink when both are placed in your ears.

Sleep mode

To conserve battery, the earbuds will automatically power off when they are out of range of your mobile device for 15 minutes and are not in the charging case, or when they have been inactive for 30 minutes.

To power the earbuds on, press the Left and Right buttons. Alternatively, place the earbuds in the charging case and then take them back out.

Multiple call handling

The earbuds can accept and handle multiple calls at the same time.

	Multiple call handling
	End current call and answer incoming call	Press the Left or Right button
	Reject incoming call, when on a call	Double-press the Left or Right button

Update firmware

The Jabra Elite 2 can be updated to the latest firmware version using the Jabra Sound+ app.

If notifications are enabled in Jabra Sound+, you will receive an automatic notification when a firmware update is available. Follow the instructions in the app to firmware update the earbuds.

Reset the earbuds

Resetting the earbuds clears the list of paired devices and factory resets all settings.

1. Place both earbuds in the charging case.
2. Press and hold (10 sec) the Left and Right buttons on the earbuds simultaneously until the LEDs on the earbuds flash pink.
3. When the LEDs stop flashing pink the earbuds have been reset.

The earbuds will need to be re-paired to your mobile device. Remember to delete/forget the pairing in the Bluetooth menu on your mobile device.

Jabra Sound+ app

Jabra Sound+ app

Personalize your music

Register your 2-year warranty

Support

FAQ

View the FAQs on Jabra.com/help/elite2

How to care for your earbuds

• Always store the earbuds in the charging case and safely protected.
• To prevent the depletion of the battery lifetime or capacity, avoid storing the earbuds in hot or cold environments, such as a closed car in summer, or in winter conditions.
• It is recommended to store the earbuds between -20°C and 45°C (-4°F and 113°F).
• Do not store the earbuds for extended periods of time without recharging them (max. three months).
• If the earbuds or the charging case become dirty, it is recommended to clean them with a soft, lint-free cloth that has been dampened with clean water.
• It is recommended to use a power supply with 5V +-0.25V and maximum charging current below 2A. It is not recommended to charge the earbuds or charging case using a power supply with a higher voltage.

Replacement accessories

Replacement or additional accessories can be purchased online at jabra.com/accessories.

Using replacement earbuds

1. Pair the replacement earbuds to your phone.
2. Update the earbud firmware using the Jabra Sound+ app.

Using a replacement charging case

Before using a replacement charging case, it is recommended to charge it for 1 hour.