Pairing Your Jabra Bt650S To A Phone Or Other Device; Wearing Style - Jabra BT650s User Manual

PaIrInG your Jabra bt650s to a Phone or
other devICe
headsets are connected to phones or other bluetooth devices
using a procedure called 'pairing' . by following a few simple steps,
pairing can be done in a matter of seconds . .
1. Put the headset in pairing mode
1 .a . first time pairing
- fold and unfold the headset and the Jabra bt650s will auto-
matically enter pairing mode (indicator light (5) is solid blue)
and start searching for a device .
1 .b . later pairing
- Press and hold the answer/end button (1) until the indicator
light (5) is solid blue (approximately 4 seconds) .
2. Set your Bluetooth phone or device to search for the Jabra
BT650s
- follow your phone's instruction guide . first make sure that
bluetooth is activated on your mobile phone . then set your
phone to search for the headset . this usually involves going
to a 'setup, ' ' connect' or 'bluetooth' menu on your phone and
selecting the option to search for or 'add' a bluetooth device .*
3. Your phone will find the Jabra BT650s
- the phone will find the headset under name "Jabra bt650s" .
- your phone then asks if you want to pair with the headset .
- accept by pressing 'yes' or 'ok' on the phone and confirm with
the passkey or PIn = 0000 (4 zeros) . your phone will confirm
when pairing is complete .

WearInG style

Please note the left/right wearing indicators inside the headband .
alternatively always wear the Jabra bt650s with the answer/end
button on you right .
adapt the size of your Jabra bt650s by extending the length of
the headband .
* refer to phone's user manual
Jabra bt650s
5