Advertisement
Thank you for using the Jabra Elite Active 65t.
We hope you will enjoy it!
Jabra Elite Active 65t features
Insert the earbud into your ear and rotate to fit comfortably. Ensure the microphone is pointing towards your mouth.
For the optimal audio experience, it is recommended to try each of the different EarGel sizes. The fit should feel tight and secure in your ear. The medium EarGel is premounted on the earbuds. Ensure the EarGel is firmly attached.
With up to 5 hours of battery in the earbuds, and 2 recharges in the charging case, the Jabra Elite Active 65t offers up to 15 hours of playtime.
Firmly hold the charging case and press the small tab on the lid while opening the lid.
Place the earbuds in the charging case and close the lid. The battery LED inside the charging case will flash red, yellow or green when the lid is opened to indicate the earbuds current battery status.
It takes approx. 2 hours to fully recharge the earbuds. If the earbuds are at low battery, you will get up to 1 hour of playtime by charging them in the charging case for 10 to 20 minutes.
Plug the charging case into a USB power supply or certified wall charger. It takes approx. 2 hours to fully charge the earbuds and the charging case.
The charging case is designed to charge using a standard USB voltage. It is not recommended to charge using a higher voltage.
Note: non-certified chargers may take longer to charge.
High battery/Power on | |
Medium battery | |
Low battery/Off | |
Very low battery/ Power off | |
Connecting/ Incoming call | |
Pairing | |
Resetting |
High battery | |
Medium battery | |
Low battery |
Charging - high battery | |
Charging - medium battery | |
Charging - low battery | |
Firmware updating | |
Fully charged |
Place the earbuds in the charging case to turn them off, or remove them from the charging case to turn them on.
The earbuds can be turned on or off individually by holding the Multi-function button on the right earbud, or the Volume down button on the left earbud, until the LED flashes green (on) or red (off).
Right earbud | Calls & music | |
Play/pause music | Press the Multi-function button | |
Answer/end call | Press the Multi-function button | |
Reject call | Double-press the Multi-function button when there is an incoming call | |
Voice assistant ((Siri, Google Assistant, Alexa)) | Hold (1 sec) the Multi-function button when not on a call | |
HearThrough on/off | Double-press the Multi-function button when not on a call | |
Left earbud | Calls & Music | |
Adjust volume | Press the Volume up or Volume down button | |
Skip track | Hold (2 secs) the Volume up or Volume down button when listening to music | |
Battery status | Press the Volume up or Volume down button when not on a call or listening to music |
HearThrough utilizes the built-in microphones to enable you to pay attention to your surroundings and engage in conversation without needing to remove the earbuds.
HearThrough settings can be configured using the Jabra Sound+ app.
Right earbud | HearThrough | |
HearThrough on/off | Double-press the Multi-function button when not on a call |
Sidetone enables you to hear your own voice when you are on a call.
Sidetone settings can be configured using the Jabra Sound+ app.
When you remove an earbud from your ear while listening to music, the music will automatically pause.
To unpause the music, place the earbud back into your ear within 60 seconds. After 60 seconds (or when mono playback is preferred) the music can be unpaused by pressing the Multi-function button.
Auto-pause music settings can be configured using the Jabra Sound+ app.
To conserve battery the right earbud will automatically power off when it is out of range of your smartphone for 15 minutes and is not in the charging case, or when it has been inactive for 1 hour.
The left earbud will automatically power off when it has not had a link with the right earbud for 15 minutes and is not in the charging case.
To power the earbuds on, place them in the charging case, or hold the Multi-function button on the right earbud, and/or the Volume down button on the left earbud, until the LED flashes.
The right earbud can be used alone for mono playback or for calls. For volume and/or skip track controls, please use your connected smartphone.
When both earbuds are turned on and within 20 centimetres (8 inches) of one another, they will automatically relink.
Right earbud | Multiple call handling | |
End current call and answer incoming call | Press the Multi-function button | |
Put current call on hold and answer incoming call | Hold (2 secs) the Multi-function button | |
Switch between held call and active call | Hold (2 secs) the Multi-function button | |
Reject incoming call, when on a call | Double-press the Multi-function button |
The earbuds can be paired to two smartphones at once, and can accept multiple incoming calls from either smartphone.
To pair to two smartphones, use the normal pairing process separately for each smartphone.
Voice guidance can be turned on/off and the language can be changed using the Jabra Sound+ app.
The following languages are available: English, French, German, Japanese, Chinese.
To activate your smartphone's Voice assistant (e.g. Siri, Google Assistant, Alexa) hold the Multi-function button when not on a call.
To change Voice assistant, download the Jabra Sound+ App and go to the Voice assistant settings.
Voice assistant settings can be configured using the Jabra Sound+ app.
The Jabra Elite Active 65t can be updated to the latest firmware version using the Jabra Sound+ app.
If notifications are enabled in the Jabra Sound+ app you will receive an automatic notification when a firmware update is available.
Resetting the earbuds clears the list of paired devices and resets all settings.
Right earbud | Reset earbuds | |
Reset pairing list and settings | Hold (10 secs) the Multi-function button until the LED flashes purple. The earbuds will need to be re-paired to your smartphone. |
Jabra Sound+ app
Customize your music
Manage HearThrough
Register your 2-year warranty
View the FAQs on Jabra.com/help/eliteactive65t.
Replacement or additional accessories can be purchased online at jabra.com/accessories.
The replacement earbuds cannot be used with your old earbuds.
Before using a replacement charging case for the first time, it will need to be synced with your current earbuds and charged for 1 hour.
To begin syncing, place your current earbuds inside the replacement charging case, and close the lid. The LED on the charging case may flash purple to indicate that the firmware is being updated. Please wait until the LED stops flashing purple before opening the charging case.
jabra.com/eliteactive65t
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Elite Active 65t that isn't answered in the manual? Leave your question here.