Viper 5601 Installation Manual page 39

times to confirm access to the seventh feature.
To select another menu:
1. Press and hold the Valet/Program switch.
2. After three seconds, the unit advances to the next menu and the siren
chirps, indicating which menu has been accessed.
If you just programmed features in the first menu and you want to program a
feature in the third menu, press and hold the Valet/Program switch. After three
seconds the siren chirps twice indicating access to the second menu. Continue
to hold the button and three seconds later the siren chirps three times indicating
access to the third menu.
Features in the third menu are then programmable following steps 4 through 6
of the System Features Learn Routine procedure.
The learn routine exits if any of the following occurs:
• The open door is closed
• The ignition is turned On
• There is no activity for 30 seconds
• The Valet/Program switch is pressed too many times
© 2008 Directed Electronics. All rights reserved.
39