Fluke 88 V User Manual page 11

•
Do not operate the Meter around
explosive gas, vapor, or dust.
•
Use only a single 9 V battery, properly
installed in the Meter case, to power the
Meter.
•
When servicing the Meter, use only
specified replacement parts.
•
When using probes, keep fingers
behind the finger guards on the
probes.
XWCaution
To avoid possible damage to the Meter or to
the equipment under test, follow these
guidelines:
•
Disconnect circuit power and discharge
all high-voltage capacitors before testing
resistance, continuity, diodes, or
capacitance.
•
Use the proper terminals, function, and
range for all measurements.
•
Before measuring current, check the
Meter's fuses. (See "Testing the Fuse").
Automotive Multimeter
Safety Information
3