Chapter 6
Printer Settings
In Printer User Mode, the following items can be changed.
For printing, however, these settings are almost unnecessary because the computer application
software is usually used to setup printing.
Settings by computer application software have priority over the ones in this machine. If the Printer
Settings in the machine are required, consult with a computer literate person. After printing, it is
recommended to reset the settings to the default values.
Printer User
No.
0-9
00
Number of Prints
01
Paper Size
02
Paper Tray
03
Print Direction
05
2-Sided Print
06
Bind Edge
07
Resolution
08
Font (PCL)
09
Symbol Table (PCL)
10-19
10
Pitch (PCL)
11
Point Size (PCL)
12
Lines/Page (PCL)
13
Return Character (PCL)
66
Parameter
Set the number of prints.
Set the paper size.
Set the paper tray.
Tray 3 or 4 is available when
the optional Paper Tray is
installed.
Set the printing direction.
Set duplex printing.
Set the binding position.
Set the resolution.
Set the font (PCL).
Set the symbol table (PCL).
Set the pitch (PCL).
Set the point size (PCL).
Set the number of lines per page
(PCL).
Set the return character (PCL).
Comments
1 - 999*
A3, B4, A4, B5, A5,
11x17, Legal, 8.5x11,
5.5x8.5, 8x13, 8.5x13,
7.25x10.5, 12x18,
Custom
Auto, Bypass, Tray 1,
Tray 2, Tray 3, Tray 4
Portrait, Landscap(e)
Off, On
Long, Short
1200dpi, 600dpi
0 - 99*
0 - 35*
00.44 to 99.99*
004.00 to 999.75
5 to 123*
CR, CR+LF
*Select "Input", and then enter the
desired value.
Printer Settings
Selective Item
Standard
Setting
1
8.5x11
Auto
Portrait
Off
Long
600dpi
0
11
10.00
012.00
60
CR