Panasonic Workio DP-C262 Function Manual page 42

Fax Parameters
No.
120-159 152 Sub-Addr Routing
153 TSI Routing
154 Route Header FMT
155 Print Routed Doc
156 Print Forward Doc
157 Transaction JRNL
42
Parameter
Set whether to automatically
route a received fax or Email
using sub-address.
Set "Valid" for routing.
Set whether to route a received
fax to a telephone number or an
Email address pre-programmed
in the Address Book using the
originating fax's Numeric ID.
Set the contents of the "From"
field when transferring Email to a
computer or internet fax on the
network by routing.
• Origi
Sender information is printed.
• Rly Stn
Relay station information is
printed.
Set whether to print a received
original to be routed.
• Inc Only
An original is printed only
when the routing operation
has failed.
• Always
An original is printed whether
the routing operation has
succeeded or failed.
Set whether to print a memory
received original designated for
forwarding.
• Inc Only
An original is printed only
when its memory transfer has
failed.
• Always
An original is printed whether
its memory transfer has
succeeded or failed.
Set whether to transfer a
communication journal to a
registered destination.
Comments
Invalid, Valid
Invalid, Valid
Origi, Rly Stn
Inc Only, Always
Inc Only, Always
Invalid, Valid
Selective Item Standard
Setting
Invalid
Invalid
Origi
Inc Only
Inc Only
Invalid