Printer Settings - Panasonic DP-2330 Operating Instructions Manual

Function

■ Printer Settings

Screen
No.
00 Number of Prints
01 Paper Size
01/04
02 Paper Tray
03 Print Direction
04 Auto Tray Selection
05 2-Sided Print
06 Bind Edge
07 Resolution
02/04
08 Font (PCL) ∗
09 Symbol Table (PCL) ∗
10 Pitch (PCL) ∗
11 Point Size (PCL) ∗
12 Lines/Page (PCL) ∗
03/04
13 Return Character (PCL) ∗
14 Mutual A4/LTR
15 Mailbox Memory Status ∗∗
16 Print Data
04/04
19 Key Operator Mode
NOTE
60
Modes
Sets the initial number of prints.
● 1 ~ 999
Sets the paper size setting.
● A3, B4, A4, B5, A5, LEDGER, LEGAL,
Sets the Paper Tray setting.
● Auto, Bypass, Tray 1, Tray 2, Tray 3, Tray 4
Sets the print direction setting.
● Portrait, Landscap
Sets the auto tray setting.
● Off, On
Sets the 2-sided print setting.
● Off, On
Sets the bind position.
● Long, Short
Sets the resolution setting.
● 1200 x 600, 600 x 600, 300 x 300
Sets the PCL font.
● 0 ~ 99
Sets PCL symbol table.
● 0 ~ 35
Sets the PCL pitch.
● 0.44 - 99.99
Sets PCL point size.
● 4.00 - 999.75
Sets PCL lines/page.
● 5 - 123
Sets PCL return character.
● CR, CR + LF
Converts A4 to Letter automatically.
● Off, On
Indicates the mailbox memory status.
● Memory, Box
Sets print data.
● Stop, Start
Input the Key Operator ID Code.
∗
When available with optional PCL.
∗∗
When available with optional Hard Disk Drive (DA-HD30) is installed.
Function
LETTER, INVOICE, 8 x 13, 8.5 x 13
Initial
Setting
1
LETTER
Auto
Portrait
On
Off
Long
600 x 600
0
11
10.00
012.00
60
CR
Off
Start