Printer Settings - Panasonic Workio DP-2330 Operating Instructions Manual

Function

■ PRINTER SETTINGS

Screen
No.
00 Number of Prints
01 Paper Size
01/04
02 Paper Tray
03 Print Direction
04 Auto Tray Selection
05 2-Sided Print
06 Bind Position
07 Resolution
02/04
08 Font (PCL)
09 Symbol Table (PCL)
10 Pitch (PCL)
11 Point Size (PCL)
12 Lines/Page (PCL)
03/04
13 Return Character (PCL)
14 Mutual A4/LTR
15 Mailbox Memory Status
16 Print Data
04/04
19 Key Operator Mode
NOTE
∗∗
60
Modes
Sets the initial number of prints.
● 1 ~ 999
Sets the paper size setting.
● A3, B4, A4, B5, A5, LEDGER, LEGAL,
Sets the paper tray setting.
● Auto, Bypass, Tray 1, Tray 2, Tray 3, Tray 4
Sets the print direction setting.
● Portrait, Landscape
Sets the auto tray setting.
● Off, On
Sets the 2-sided print setting.
● Off, On
Sets the bind position.
● Longedge, Shortedge
Sets the resolution setting.
● 1200 x 600, 600 x 600, 300 x 300
Sets the font of PCL.
● 0 ~ 99
Sets symbol table (PCL).
● 0 ~ 35
Sets pitch (PCL).
● 0.44 - 99.99
Sets point size (PCL).
● 4.00 - 999.75
Sets lines/page (PCL).
● 5 - 123
Sets return character (PCL).
● CR, CR + LF
Converts Letter to A4 automatically.
● Off, On
Indicates the memory status of mailbox.
● Memory, Box
Sets print data.
● Stop, Start
Input the Key Operator ID Code.
∗
When available with optional PCL.
When available with optional Hard Disk Drive (DA-HD30) is installed.
Function
LETTER, INVOICE, 8 x 13, 8.5 x 13
Initial
Setting
1
A4
Auto
Portrait
On
Off
Longedge
600 x 600
0
11
10.00
012.00
60
CR
Off
Start