Electrolux GS 23 CH Service Manual page 6

Installation :
- Adhere humidity protection foil according to
instructions mentioned on reverse of foil (cut to
length if necessary).
- Install side ledges to cupboard sidewalls
according to separate installation instructions.
- Place appliance in front of upright cupboard,
draw cables and hoses through upright
cupboard niche across base area towards
adjacent cupboard. Push the appliance into the
niche, while continuously draw along the cables
and hoses to prevent these from being
squeezed or buckled.
- Align the dishwasher to centreline of the niche
and flush with the side ledges by fitting in
adjustment plates, if necessary.
- Carefully open appliance door to avoid changing
the adjusted appliance. Fix appliance with
screws through provided holes to the sidewalls
of the piece of furniture on both sides in upper
inner area (see Detail A).
Before securing the dishwasher obliquely by two
further screws through the floor plate (absolutely
first drill holes!), it is advisable to protect the
appliance door against damage by applying
suitable material (such as the packaging
cardboard). Open the door, for this fitting
operation, by approx. 45 degrees (see Detail B).
Spares Operation 07.02 A. B.
Detail A
Detail B
- 6 - 599 51 13 34 EN