Water Softener
Dismantling the water softener system
Take off cable control
Spares Operation 07.02 A. B.
Water level in regeneration dosing system
after one filling step.
If the water level falls during rinsing
cycles, there is leakage on the salt cover,
regeneration valve or inside the softener
system.
This results in poor washing and salt
stains on the dishes.
Water inlet, lift off cover, unscrew nut
Salt filler neck, loosen threaded socket by
knocking lightly on the catches.
Remove front base screws, only loosen
rear screws.
- 56 -
599 51 13 34
EN