Select Storage
Specify memory media that you want to store the file in.
Select the memory media.
Press [Scan].
The Scan screen is displayed.
You can set various scan functions. For more
information, see p. 39 to p. 42 in this manual.
Start Scanning
After specifying the settings, press
Press
.
When scanning is complete, remove your originals.
If the following screen appears, press
the next original. After all originals are scanned,
press [Start Storing].
When scanning is complete, remove your originals.
If a login service such, as Department ID
Management or SSO-H has been set, press
(Log In/Out) to log out.
.
to scan