Frequently Asked Questions - Canon imageRUNNER Advance C2030i Basic Operation Manual

Frequently Asked Questions

Frequently Asked Questions
This section includes frequently asked questions and answers regarding the machine. Use this section if you have trouble using the machine.
Q
I want to make a rush copy, but I cannot because of the long copy job.
Q Can I scan an original on the machine and save it to a computer?
Q
Can I make copies or send a facsimile of different size originals at the same time?
Q I want to send the scanned originals via an e-mail. Which screen do I operate from?
Q
Can a mark be applied to the document that has been scanned?
Q Do I need to enter the address of the recipient every time?
Q
Can you give me information on how to send to the SMB server and specify its settings?
Q Can I move the Address Book registered on another Canon machine onto this machine?
Q
I want to check the IP address for this machine to run the Remote UI, but I do not know how to check it.
Q0 Can I forward the data received via fax/I-fax?
Q
When sending a fax, can the machine be set so that the sender's fax number and name be displayed?
Q Can I send a fax to multiple destinations?
Q
Can I change the language displayed on the touch panel display?
Can I change the screen or the order that the functions are displayed on the touch panel display when the power is
Q
turned ON?
Q
How do I change the default settings for the Copy from the Colour mode to the Black mode?
Q How do I change the default settings (scan settings and file format) of the Scan and Send Basic Features screen?
Q
Is there a way to prevent a transmission error when sending a facsimile to a new destination?
Q Can I change the print settings in the printer driver?
Q When copying, the Scan screen for the next document is displayed. Is there a way to not display this screen?
Q0
Can I restrict the number of colour copies/prints?
Q The content of the reverse side appears on the copies.
Q
The quality of the image sent by fax is not good.
Q The printed paper appears dirty. Also, the colour appears to be different from the original.
Q
The printed paper is warped.
Q The edges are not copied when I perform enlargement/reduction.
Q
Can I print on the reverse side of the preprinted paper?
Q Can I output paper to a different tray according to the function?
Q
Can I print on envelopes?
Q What are the types of paper that I can use?
Q0
What is the model number of the staple cartridge for the finisher or the stamp cartridge for the feeder?

Question Applicable Page
p. 115
p. 116
p. 117
p. 118
p. 119
p. 120
p. 121
p. 123
p. 123
p. 124
p. 125
p. 126
p. 127
p. 128
p. 129
p. 130
p. 131
p. 132
p. 134
p. 135
p. 136
p. 137
p. 138
p. 138
p. 139
p. 139
p. 140
p. 140
p. 141
p. 141