Replacing The Waste Toner Container - Canon imageRUNNER Advance C2030i Basic Operation Manual

Replacing the Waste Toner
Container
When the waste toner container nears capacity, the message <Replace the waster toner container.> appears on the touch
panel display. In this case, you should prepare a new waste toner container.
When the waste toner container is full, the instructions to replace the waste toner container appear on the touch panel
display. Follow the instructions on the touch panel display, and the procedure described below to help you replace the
waste toner container.
Even if you do not replace the waste toner container immediately, you can perform printing for a while. (The number of
prints you can make depends on the content you are printing.)
However, if you continue printing, an error will occur and you will become unable to print.
Do not burn or throw used waste toner containers into open flames. Also, do not store waste toner
containers in places exposed to open flames, as this may cause the toner to ignite, resulting in burns or a
fire.
• Your local authorized Canon dealer will dispose of the used waste toner container. Use the provided cover to cover up the
opening of the used waste toner container.
• Used toner cannot be reused. Do not mix new and used toner together.
• Use only waste toner containers intended for use with this machine.
• Do not replace the waste toner container before the message prompting you to replace it appears on the touch panel
display.
• Complete instructions on how to replace the toner cartridge can be accessed by pressing [Previous] or [Next] on the
touch panel display.
• If the waste toner container must be replaced during a print job, the remaining prints are made after the new waste toner
container is installed.
• The waste toner container can be replaced while the machine is operating.


Pull out the waste toner container from the right rear side of the machine.

2
1
1. Open the cover for the waste toner
container.
2. Pull out the waste toner container.