Configuring Unused Line Keys For Call Park On The Cisco Spa 525G (Metaswitch) - Cisco SPA 501G Administration Manual

Configuring Lines and Extensions
Configuring Lines
STEP 6
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Click Submit All Changes.
In this example, after this configuration, Bob can press line button 5 to dial Mark's
line.
Configuring Unused Line Keys for Call Park on the Cisco SPA
525G (MetaSwitch)
You can configure unused line keys for call park (for the MetaSwitch softswitch) on
the Cisco SPA 525G. Users can then press this line button to park a call or retrieve
a parked call. To configure:
Log in to the web administration interface.
Click Admin Login.
Click advanced.
Click the Attendant Console tab. In the
choose RFC3265_4236.
Click the Phone tab.
Choose the line key to configure (line 5 in this example):
Extension
a. From the
Share Call Appearance
b. From the
c. Enter the following string in the Extended Function field:
fnc=prk;sub=05@domain.com
where:
- fnc: function
- prk: call park
- sub: call park orbit, or location where the call is parked. Valid value range
is from 01 through 10. In this example, 5 is used.
- domain.com: phone domain, usually the same as the "proxy" value in the
Ext 1 tab. You can also use fnc=prk;sub=05@$PROXY to use this value.
General
drop down list, choose Disabled.
drop-down list, choose private.
Server Type
section, under
2
,
26