Digit Sequence Examples - Cisco SPA 501G Administration Manual

Configuring Dial Plans
About Dial Plans
NOTE
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
The Cisco SPA 9000 and the Cisco IP phones implicitly append the vertical code
sequences entered in the regional parameter settings to the end of the dial plan.
Likewise, if Enable_IP_Dialing is enabled, then IP dialing is also accepted on the
associated line.

Digit Sequence Examples

The following examples show digit sequences that you can enter in a dial plan.
In a complete dial plan entry, sequences are separated by a pipe character (| ) , and
the entire set of sequences is enclosed within parentheses.
EXAMPLE: ( [1-8]xx | 9, xxxxxxx | 9, <:1>[2-9]xxxxxxxxx | 8,
<:1212>xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx ! |
9, 011xxxxxx. | 0 | [49]11 )
• Extensions on your system
EXAMPLE: (
[1-8]xx
<:1212>xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx !
| 9, 011xxxxxx. | 0 | [49]11 )
Allows a user dial any three-digit number that starts with the digits 1
[1-8]xx
through 8. If your system uses four-digit extensions, you would instead enter
the following string:
• Local dialing with seven-digit number
EXAMPLE: ( [1-8]xx |
<:1212>xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx !
| 9, 011xxxxxx. | 0 | [49]111)
After a user presses 9, an external dial tone sounds. The user can
9, xxxxxxx
enter any seven-digit number, as in a local call.
• Local dialing with 3-digit area code and a 7-digit local number
EXAMPLE: ( [1-8]xx | 9, xxxxxxx |
<:1212>xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx !
| 9, 011xxxxxx. | 0 | [49]11 )
| 9, xxxxxxx | 9, <:1>[2-9]xxxxxxxxx | 8,
[1-8]xxx
9, xxxxxxx | 9, <:1>[2-9]xxxxxxxxx | 8,
9, <:1>[2-9]xxxxxxxxx
8
| 8,
170