Lightweight Directory Access Protocol (Ldap) Corporate Directory Search - Cisco SPA 501G Administration Manual

Cisco SPA 500 Series and Wireless IP Phone Field Reference
Phone Tab
NOTE
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Lightweight Directory Access Protocol (LDAP) Corporate
Directory Search
Does not apply to the WIP310.
If using Active Directory with authentication set to MD5, you must first configure
the following:
• Click the System tab. In the Optional Network Configuration section, under
Primary DNS, enter the IP address of the DNS server.
• In the Optional Network Configuration section, under Domain, enter the
LDAP domain.
Parameter
LDAP Dir Enable
LDAP Corp Dir Name
LDAP Server
LDAP Auth Method
Description
Choose yes to enable LDAP.
Enter a free-form text name, such as "Corporate
Directory."
Enter a fully qualified domain name or IP address of
LDAP server, in the following format:
nnn.nnn.nnn.nnn
Select the authentication method that the LDAP
server requires. Choices are:
•
None—No authentication is used between the
client and the server.
•
Simple—The client sends its fully-qualified
domain name and password to the LDAP server.
May present security issues.
•
Digest-MD5—The LDAP server sends
authentication options and a token to the client.
The client returns an encrypted response that is
decrypted and verified by the server.
B
257