Configuring Unused Line Keys For Call Park On The Cisco Spa525G/525G2 (Metaswitch) - Cisco SPA303 Administration Manual

Configuring Lines and Extensions
Configuring Lines
STEP 6
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Click Submit All Changes.
In this example, after this configuration, Bob can press line button 5 to dial Mark's
line.
Configuring Unused Line Keys for Call Park on the Cisco
SPA525G/525G2 (MetaSwitch)
You can configure unused line keys for call park (for the MetaSwitch softswitch) on
the Cisco SPA525G/525G2. Users can then press this line button to park a call or
retrieve a parked call. To configure:
Log in to the configuration utility.
Click Admin Login.
Click advanced.
Click the Attendant Console tab. In the
choose RFC3265_4236.
Click the Phone tab.
Choose the line key to configure (line 5 in this example):
Extension
a. From the
Share Call Appearance
b. From the
c. Enter the following string in the Extended Function field:
fnc=prk;sub=05@domain.com
where:
- fnc: function
- prk: call park
- sub: call park orbit, or location where the call is parked. Valid value range
is from 01 through 10. In this example, 5 is used.
- domain.com: phone domain, usually the same as the "proxy" value in the
Ext 1 tab. You can also use fnc=prk;sub=05@$PROXY to use this value.
General
drop down list, choose Disabled.
drop-down list, choose private.
Server Type
section, under
2
,
39