Wiring, Settings; Nmea 2000 ® Connection; Direct Connection - Furuno GP-330B Operator's Manual

2.

WIRING, SETTINGS

2.1 NMEA 2000
The LEN (Load Equivalency Number) for this equipment is 3.
2.1.1

Direct Connection

Insert the contact pin (supplied) into the #5 socket of the GPS Receiver connector to activate the
termination resistor. (See page 8 for location of #5 socket.) Route the cable assembly to the
®
NMEA 2000 device. Coil any excess cable and secure it with a cable tie to prevent damage. Con-
nect the cable assembly to the NMEA 2000
- Radar Sensor*
- FI-50 Series Instrument
®
Connection
®
device.
Cable Assembly
22-1025-02 (6 m)
22-1025-06 (10 m, option)
* Cut plug from cable and connect
wires to terminal/connector.
6
GP-330B
Termination
Resistor: ON