NordicTrack NTL17008.0 User Manual page 8

1. With the help of a second person, tip the
Uprights (43) down as shown.
Attach the four Base Feet (96) to the bottom of
the Uprights (43) with four #8 x 1" Tek Screws
(1) in the locations shown.
2. With the help of a second person, tip raise the
Uprights (43) to the position shown.
Connect the 75" A/V Wire (126) to the 25" A/V
Wire (132), and connect the 80" TV Cable (125)
to the 25" TV Cable (131).
Have a second person hold the console assem-
bly near the Uprights (43). Connect the Upright
Wire (93) to the 25" Wire Harness (101). See
the inset drawing. The connectors should
slide together easily and snap into place. If
they do not, turn one connector and try again. IF
THE CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAM-
AGED WHEN THE POWER IS TURNED ON.
1
1
96
1
96
43
2
131
125
132
126
43
101
93
8
96
1
1
96
Console
Assembly
101
93