Fitting The Cutting Head - Jonsered FR2311 M Operator's Manual

2 Apply and lock the parking brake.
3 Check that the lever for setting the cutting height is in the
S position.
4 Put the lifting lever in the mowing position.
5 Release the clip on the front hood and lift off the fender.
6 Loosen the spring on the drive belt's belt idler by
loosening the handle.
7 Lift of the drive belt.
8 Grab the upper pipe construction of the deck and pull it
out.
Maintenance
9 Lift off the deck and lean it against the machine or a wall.

Fitting the cutting head

1 Place the belt under the stay of the cutting deck.
2 Fit the cutting deck's pipe together with the deck frame's
pipe.
3 Push the cutting deck in and make sure the guide bolts fit
into the grooves on the deck frame, one on each side.
4 Grab the pipes and push the deck in.
5 Push the deck until you feel the pipes touch bottom.
– 21
English