Table of Contents
Advertisement
IMPORTANT BATTERY SAFETY INSTRUCTIONS
• Use only the power cord and batteries indicated in this manual. Do not dispose
of batteries in a fire. They may explode. Check with local codes for possible
disposal instructions.
• Do not mix old and new batteries.
• Do not open or mutilate the batteries. Released electrolyte from the batteries is
corrosive and may cause burns or injury to the eyes and skin. The electrolyte is toxic
and may be harmful if swallowed.
• Exercise care when handling the batteries. Do not allow conductive materials such as
rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause
the batteries and/or the conductive material to overheat and cause burns.
• Charge the batteries (optional) identified for use with this product only, in accordance
with the instructions and limitations specified in this manual.
• Only use a compatible base unit (or charger) to charge the batteries. Do not tamper
with the unit (or charger). Failure to follow these instructions may cause the batteries
to swell or explode.
The base batteries are optional (for backup only). If you choose to install backup
batteries, use rechargeable batteries ONLY. The backup batteries should be
AA, NiMH, rechargeable only, rated 1900mAh. They must be fully charged for 3 days
before using the backup batteries (before using the phone without the power adapter,
during a power outage).
The backup batteries ensure the functionality of your unit for 3-4 hours in case of a
power outage.
To install batteries in the base:
1. Turn the unit over and open battery compartment door.
2. Install batteries according to the polarity shown inside the battery compartment.
3. Close the battery compartment.
CAUTION: Disconnect the telephone line from the equipment before
replacing batteries.
WARNING: USE RECHARGEABLE BATTERIES ONLY.
DO NOT USE ALKALINE BATTERIES!
SAVE THESE INSTRUCTIONS
7
Advertisement
Table of Contents
