Battery Installation - Clarity P400 User Manual

Fig. 5 – Phone base installation for
wall mounting
3. Using the short modular cord,
mount the phone as shown in
figure 6.
4. Set the dial mode switch to T
(tone) if you have touch tone service.
Set the switch to P (pulse) if you
have pulse rotary) dialing.
C. Battery Installation
To make the visual ringer brighter
install a 9 volt battery.
Installation
Fig. 6 – Wall mounting installation
5. Connect the handset cord to the
telephone as shown in figure 3.
6. Lift the handset and listen for a
dial tone.
7. Your P400 phone is ready for use.
Insert 9V battery into compartment
in base of phone
Slide-out battery
compartment lid
to access battery
compartment
Battery
compartment
Press here to
open battery
compartment
Fig. 7 – Battery installation
11