Making A Call - Nortel 1140E User Manual

Internal autodial
1 Press Feature *2.
2 Press a memory button.
3
Dial the extension number.
4 Press OK to store the extension number.
Features
1 Press Feature *3.
2
Press a memory button.
3 Press Feature and enter the feature code.
4 Press OK to store the feature code.
Erase memory buttons
1
Press Feature *1.
2
Press a memory button.
3 Press OK to erase the phone number saved on the button.

Making a call

There are many ways to place a call depending on your telephone programming and the type of
call.
Making external calls using line soft keys
1 Lift the handset.
2 Tap a line soft key.
3
Dial the external telephone number.
Making external calls using intercom soft keys
1
Lift the handset.
2 Tap an intercom soft key, and enter a line pool access code.
3 When you hear an external dial tone, dial the external telephone number.
Note: Contact your system administrator for a list of line pool codes. When
entering a line pool access code on PRI lines, you do not hear a dial tone.
Chapter 4 Telephone setup
IP Phone 1140E User Guide
25