30. Changed or improved Functions in Ver. 1.31
30.1. Preset name
Double-byte characters are allowed to be used with the preset name.
However, double-byte characters are not displayed in the superimposed.
30.2. Exposure
Setup UI/CGI for the iris and shutter speed control is changed.
Setting for the auto iris is eliminated, and it is made so the iris is closed only when it
is too bright even with the fastest shutter speed.
Notes
When the version is upgraded from the one before Ver.1.31 to Ver.1.31 or later,
the value displayed on the UI and the actual operation may differ. In such a
case, configure the setup again with the UI.
When
AutoShutterMinSpeed), turn on AutoShutter and AutoSlowShutter.
31. Newly Added Functions in Ver. 1.26
31.1. Supported models
In the Ver.1.26 SNC-CH280 DH280 have been newly supported. The IR illuminator function
of these models is also supported by this version.
In Active X Viewer, SNC-CH280 and DH280 are added as a displayed model name.
31.2. Language
The following languages are newly supported.
Chinese (
Traditional
Korean
31.3. Frame rate setting
The following values are newly supported for frame rate setting.
12 fps
16 fps
31.4. Auto slow shutter setting
The "1/30" option is newly supported for auto slow shutter setting.
31.5. RTSP Multicast streaming
The request of multicast streaming by RTSP is newly supported.
32. Changed or improved Functions in Ver. 1.26
32.1. Assigning the IP address to the camera by ARP commands
The function that ARP commands assign an IP address to the camera is now selectable
either ON or OFF.
Please refer to CGI manual for details.
Sony Corporation
Release Note
using
the
newly
Chinese character)
added
CGI
(AutoShutterMaxSpeed,
20