Panasonic DP-MB300 Operating Instructions Manual page 62

8. Programmable Features
Feature/Code
Setting the paper input tray to
use for printing received
faxes
{#}{4}{4}{0}
Receiving a fax into the
computer
{#}{4}{4}{2}
Setting the computer for PC
fax reception
{#}{4}{4}{3}
Sending legal size
documents using the scanner
glass
{#}{4}{4}{5}
Setting the fax preview mode
{#}{4}{4}{8}
Setting the web fax preview
access code
{#}{4}{5}{0}
Resetting fax features to their
default settings
{#}{4}{5}{9}
62
Selection
This feature will be displayed only when the lower input tray is installed (page
74).
{1} "#1": Standard input tray
{2} "#2": Lower input tray
{3} "AUTO" (default): The unit will automatically select the standard input tray or
the lower input tray according to the paper size of the received faxes.
Note:
L To select "#2", select "PLAIN PAPER" or "THIN PAPER" for the recording
paper type setting (feature #383 on page 57).
L Even if you select "AUTO", recording paper will always be fed from the
standard input tray if "THICK PAPER" is selected for the recording paper
type setting (feature #383 on page 57).
If you wish to receive a fax into a computer, activate this feature and run [PC
FAX] from Multi-Function Station.
This feature is available when the fax preview mode is turned OFF (feature
#448 on page 53).
{0} "OFF": Deactivates this feature.
{1} "ALWAYS": If the unit recognizes the connection to the computer, it will
transfer received documents to the computer. If the unit cannot recognize the
connection, it will store received documents into memory, and then transfer the
data after recognition of the PC connection.
{2} "CONNECTED" (default): If the unit recognizes the connection to the
computer, it will transfer received documents to the computer. If the unit cannot
recognize the connection, it will print the data.
To select the computer that will be used for receiving a fax. See page 24 for
details.
{0} "OFF" (default): Deactivates this feature.
{1} "NEXT FAX": Legal-size documents can be sent for the next fax
transmission using the scanner glass. After transmission, this setting will turn
OFF automatically.
{2} "ALWAYS": Legal-size documents can be sent using the scanner glass
anytime.
See page 53 for details.
See page 53 for details.
{0} "NO" (default)
{1} "YES"
To reset the fax features:
1. {Y} i {#}{4}{5}{9}
2. Press {1} to select "YES". i {OK} i {OK} i {Y}
Note:
L The PC fax reception (feature #443 on page 24) will not be reset.
L If you select "YES", the unit will print the received fax documents that have
been stored into memory.