Panasonic DP-MB300 Operating Instructions Manual page 57

Hide thumbs Also See for DP-MB300:
Table of Contents

Advertisement

Feature/Code
Setting the recording paper
size in the standard input tray
{#}{3}{8}{0}
Setting the recording paper
size in the lower input tray
{#}{3}{8}{2}
Setting the recording paper
type
{#}{3}{8}{3}
Setting the waiting time for
the power save mode
{#}{4}{0}{3}
Holding the previous contrast
setting
{#}{4}{6}{2}
Setting the default operation
mode
{#}{4}{6}{3}
Setting the default operation
mode timer
{#}{4}{6}{4}
Setting toner save feature
{#}{4}{8}{2}
Selection
{1} "LETTER": Letter-size paper
{2} "A4" (default): A4-size paper
{3} "LEGAL": Legal-size paper
This feature will be displayed only when the lower input tray is installed (page
74).
{1} "LETTER": Letter-size paper
{2} "A4" (default): A4-size paper
{3} "LEGAL": Legal-size paper
{1} "PLAIN PAPER" (default): 75 g/m
{2} "THIN PAPER": 64 g/m
{3} "THICK PAPER": 90 g/m
Note:
L This setting is valid for both the standard input tray and the lower input tray.
L "THICK PAPER" will not be displayed if any of the paper input tray settings
are changed to "#2" or "#1+#2":
– fax (feature #440 on page 62).
– copy (feature #460 on page 63).
®
– PCL
(feature #760 on page 64).
– scan to email print feature (feature #565 on page 69).
To set the length of time before the unit enters power save mode.
{1} "5min": 5 minutes
{2} "15min" (default): 15 minutes
{3} "30min": 30 minutes
{4} "1h": 1 hour
Note:
L When in power save mode, the unit needs to preheat the fuser unit before
it can begin printing.
{0} "DISABLED" (default): Deactivates this feature.
{1} "ENABLED": The unit will hold the previous setting.
Note:
L The previous setting will be held individually for copying.
L The previous setting will be held individually for sending faxes.
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
{1} "COPY" (default): Copy mode is selected as default.
{2} "FAX": Fax mode is selected as default.
Note:
L You cannot select the scan mode using this feature.
To set the timer before returning to the default operation mode (feature #463).
{0} "OFF": Deactivates this feature.
{1} "30s": 30 seconds
{2} "1min" (default): 1 minute
{3} "2min": 2 minutes
{4} "5min": 5 minutes
{0} "OFF" (default): Deactivates this feature.
{1} "ON": The toner cartridge will last longer.
Note:
L This feature may lower the print quality by reducing toner consumption.
L This setting is valid for copying, and when the unit automatically prints
reports/lists.
L This setting is invalid for printing received faxes.
8. Programmable Features
2
2
to 90 g/m
paper.
2
2
to 75 g/m
paper.
2
2
to 165 g/m
paper.
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents