Using The Scanner Function - Oce OP1030 Operation Manual

1-3 Using the Scanner Function

The following gives an explanation of the scanning functions of your copier. Make the appropriate settings
according to your scanning needs.
For more detailed information regarding the setting procedures for the functions in each different scanner,
refer to the <Setup Edition> of your Operation Guide.
Basic settings
Select original size Selects the available original sizes (scanning area).
Selects the desired scanning area based on the entered
Input size
original size.
Select sending Selects the available image transmission sizes (size of
size the transmitted image).
Scanning Sets the desired level of fineness (resolution) at which
resolution the original will be scanned.
Specifies the position of the top edge of the original once
Orig. set direction
the original is set.
File type Sets the desired format of the image file.
Page 1-8
See page
1-13
See page
1-13
See page
1-14
See page
1-14
See page
1-15
See page
1-15