Running Adminmanager; Setting The Ip Address - Oce OP1030 Operation Manual
Scan system functions
Hide thumbs
Also See for OP1030:
- Operation manual (296 pages) ,
- Operation manual (24 pages) ,
- Operation manual (32 pages)
Table of Contents
Advertisement
3-6 Configuration Tool
(2) Running AdminManager
Click on Start in the Windows Task Bar and select Program -> IB-2x Tools -> AdminManager from the
resulting pop-up menus.
(3) Setting the IP Address
The following procedure explains how to use AdminManager to set the IP address in the Scanner Interface
Card. Perform this procedure when you want to set a static IP address.
1. Run AdminManager.
2. Under Setup in the Menu Bar, select Set Initial IP Address. The IP Address Setup window will open.
Page 3-124
Advertisement
Table of Contents
