Using The Self Timer Record Function - Roland R-09HR Owner's Manual

Using the Self Timer Record function (Self Timer)
The Self Timer function lets you specify a time delay that will be inserted after you press the
[REC Button] until recording actually begins.
■ Setting the self timer
fig.recoedersetting-e.eps_80
1.
Select "Recorder Setup" from the <Menu
Screen>.
Use the [PLAY Button
"Recorder Setup," then press the [REC Button].
g.setsamplingrate-e.eps_80
2.
Select "Self Timer," and specify the time.
Use the [PLAY Button
the cursor to Self Timer, and use the [PREV Button
[NEXT Button
will begin.
Setting
■ Recording with the Self Timer
ig.rec-start.eps_80
3.
Return to the <Main Screen>, and record
using the procedure described on p. 34 of
the owner's manual.
When you press the [REC Button] from recording-standby
mode, the self timer will start, and recording will begin
when the time you specified in step 2 has elapsed. While
the self timer is operating, the screen will show a count,
and the REC indicator and REMOTE indicator will blink
faster.
If you press the [REC Button] or [PLAY Button] while the count is
displayed, recording will begin immediately regardless of the time
you specified.
] and [STOP Button
] and [STOP Button
] to specify the time delay until recording
OFF
2 sec
5 sec
10 sec
R-09HR configuration settings
] to select
Move the
cursor
up or down
] to move
] and
Changes
the value
Enter
Rapid blinking
91