Graphic Tuner - Roland R-09HR Owner's Manual

Graphic Tuner

This tuner graphically shows the pitch change in real time. It is a convenient way for you to
practice singing or playing a wind instrument with a stable pitch.
fig.recoedersetting.eps_80
1.
Select "Graphic Tuner" from the <Menu
Screen>.
Use the [PLAY Button
"Graphic Tuner," then press the [REC Button].
fig.recoedersetting.eps_80
2.
Specify the desired type/note and reference
pitch.
If desired, use the [PLAY Button
to specify the tuner type/note, and use the [PREV Button
] and [NEXT Button
Type/Note
Reference pitch
g.process.eps_80f
3.
Facing the microphone, play the note that
you want to tune.
Adjust the pitch so that the graph value comes to the center
(±0) of the vertical axis. When the pitch is correct, the
dashed line above will stop moving.
.process.eps_80f
If the pitch is below the specified note, a position below the
center line will light, and the dashed line will flow from
right to left.
process.eps_80f
If the pitch is above the specified note, a position above the
center line will light, and the dashed line will flow from left
to right.
When using the tuner or graphic tuner, the input level is fixed for
the internal microphone, external microphone, and line input, and
cannot be adjusted.
] and [STOP Button
] and [STOP Button
] to adjust the reference pitch.
Range
AUTO /C, C#, D, D#, E,
F, F#, G, G#, A, A#, B
435 Hz–445 Hz
] to select
Move the
up or down
]
Factory setting
AUTO
440 Hz
R-09HR configuration settings
cursor
Adjust reference pitch
Switch type/note
Sound/mute
reference pitch
Enter
115