Downloading Songs To A Pc; Connecting To The Pc - Roland R-09HR Owner's Manual

Downloading songs to a PC

By connecting a PC to the R-09HR via a USB cable, songs from the R-09HR's memory card
can be downloaded to the PC and used by music software. Also, songs on the PC can be
sent to the R-09HR for playback.
Supports USB 2.0 (HI-SPEED USB). When connected to a PC supporting USB 2.0, high-speed transfer is possible.
Be sure to use the AC adaptor when connecting to a PC.
If the batteries become exhausted while copying a song, the song may be corrupted.

Connecting to the PC

1.
Start up the PC.
2.
Check that the memory card is in place.
Check that the memory card is inserted in the [Memory Card Slot] on the R-09HR.
"Inserting" (p. 25)
fig.open-main-e.eps_80
3.
Show the <Main Screen>.
How many times the [FINDER Button] or [MENU Button] needs to
be pressed depends on the screen that is showing.
fig.usbin-e.eps_80
4.
Connect with the USB cable.
The R-09HR connects to the PC with the included USB
cable.
• When connecting the USB cable to the PC, avoid touching the
metal portions. Hold the base when inserting the plug.
• If you connect to a PC without having a memory card in place,
the R-09HR's display shows "No Card."
• The PC will not recognize the R-09HR if connecting while the
<Menu Screen> is showing or during playback or recording.
First, disconnect the USB cable connecting the R-09HR to the PC,
and then return to step 3.
• Once connected to the PC with the <USB Screen> showing, no features
can be used. All other buttons and switch operations will be ignored.
• When "Insert the disk for this file type?" is shown on the PC,
click on [Cancel].
fig.usb.eps_80
After a while, the R-09HR is recognized by the PC, and the
<USB Screen> is shown in the R-09HR's display.
Show
<Main Screen>
To the PC
USB jack
USB
Jack
Hold the base
when inserting the plug.
67