Adjusting/Replacing Telescoping Front Rigging Support - Invacare Wheelchair Owner's Operator And Maintenance Manual

FWD WHEELCHAIRS
5. HIGH BACK CAPTAIN'S SEATS ONLY - Connect
the limit switch. Refer to DISCONNECTING/CON-
NECTING LIMIT SWITCH in this procedure of the
manual.
FOLDING.
1. HIGH BACK CAPTAIN'S SEATS ONLY - Discon-
nect the limit switch. Refer to DISCONNECTING/
CONNECTING LIMIT SWITCH in this procedure of
the manual.
Refer to INSTALLING/
REMOVING BATTERY
BOXES in this procedure
of the manual.
CAUTION
HIGH BACK CAPTAIN'S
SEATS ONLY - Discon-
nect limit switch BE-
FORE removing seat -
damage to seat can
occur.
Refer to DISCONNECT-
ING/CONNECTING LIMIT
SWITCH in this procedure
of the manual.
FIGURE 2 - TRANSPORTING EXCEL -
CAPTAIN'S SEATS
Refer to INSTALLING/RE-
MOVING FOOTRESTS or
INSTALLING/REMOVING
ELEVATING LEGRESTS
in PROCEDURE 3 of this
manual.
Refer to BATTERY TRAY
in this procedure of the
manual.
Push Brackets
Crossbraces
2. Remove the Captain's Seat. Refer to REMOVING/
INSTALLING CAPTAIN'S SEAT in this procedure of
the manual.
3. Remove the shrouds. Refer to REMOVING/INSTALL-
ING SHROUDS in this procedure of the manual.
4. Remove the batteries and footrests/legrests from the
wheelchair. Refer to FIGURE 2.
ADJUSTING/REPLACING
TELESCOPING FRONT RIGGING
SUPPORT (FIGURE 3)
1. Lift up on the crossbraces until they release from the
H-blocks on the wheelchair frame.
2. Remove the phillips bolt and locknut that secure the
front H-block to the wheelchair frame.
3. Remove the two (2) locknuts and socket bolts that
secure telescoping front rigging support to wheelchair.
4. If necessary, remove the hex bolt and locknut that
secures the battery charger connector bracket to
the wheelchair.
Adjusting
1. Position the telescoping front rigging support to the
desired depth.
Phillips Bolt
H-Block
Front Socket Bolt
Socket Bolt
Wheelchair
Frame
Locknuts
DO NOT USE WITH FRONT
SOCKET BOLT
Hex Bolt
and Locknut
Battery
Charger
Bracket
FIGURE 3 - ADJUSTING/REPLACING
TELESCOPING FRONT RIGGING SUPPORT
29
PROCEDURE 10
W
W
FRONT SOCKET
BOLT
POSITIONS (IN
INCHES DEEP):
16
and
18
17
Telescoping Front
Rigging Support
F
D
H
E
E
L
C
H
A
I
R
S