Invacare Wheelchair Owner's Operator And Maintenance Manual page 27

BATTERIES
9. Install the battery box(es) into the wheelchair. Refer
to INSTALLING/REMOVING BATTERY BOX(ES) in
the PROCEDURE 10 - FWD MODELS or PROCE-
DURE 11 - RWD MODELS of this manual.
NOTE: New Battery(ies) MUST be fully charged BEFORE
using, otherwise the life of the battery(ies) will be reduced.
CONNECTING BATTERY CABLE(S) TO BATTERY(IES) TERMINAL(S)/POST(S) CONNECTING BATTERY CABLE(S) TO BATTERY(IES) TERMINAL(S)/POST(S)
POSITIVE (+) Battery Terminal/
Post and Battery Clamp
Fuse Box placement
when box top
is installed
Positive (+) RED
Battery Cable
Fuse
Box
Positive (+) RED
Battery Cable
Negative (-) BLACK
Battery Cable
Group 22NF Battery
NOTE: Battery clamps exploded away for clarification purposes only.
NEGATIVE (-) Battery
Terminal/Post
Tie-Wrap
Group 22NF Battery
FIGURE 6 - CONNECTING BATTERY CABLES - BATTERY CLAMP METHOD
NEGATIVE (-) Battery Terminal/
Post and Battery Clamp
NEGATIVE (-) Battery Terminal/Post
DETAIL "B"
RED Battery Clamp Cover
BLACK Battery Clamp Cover
27
10. If necessary, charge the battery(ies). Refer to
CHARGING BATTERIES in the PROCEDURE 10 -
FWD MODELS or PROCEDURE 11 - RWD MOD-
ELS of this manual.
Negative (-) BLACK
Battery Cable
TOP VIEW
Group 22NF Battery
Hex Screw
Mounting Plate Mounting Plate
Battery Clamp
EXPLODED
POSITIVE (+) Battery
Terminal/Post
POSITIVE (+) Battery
PROCEDURE 9
DETAIL "A"
VIEW
Terminal/Post
Tie-Wrap
B
A
T
T
E
R
I
E
S