Log Set Installation; Install The Log Set - Jøtul Katahdin GI 450 DV II Installation And Operation Instructions Manual

2
Figure 24. Install brick panels in the order indicated above.
6. Replace the Grate assembly and secure it with the
nuts previously removed.
7. Replace the burner tube. Correctly installed, it will be
level, with the lower half engaged within the air shut-
ter, and the upper half seated behind the air deflector.
See figs. 25 and 26.
Figure 25. Correct burner tube alignment.
Figure 26.
re 24.
3
1 4

Install the Log Set

NOTE: Install the optional Brick Panels before installing
the Log Set.
The Katahdin is equipped with a seven-piece log set
packaged separately.
1. Unwrap each log and set on floor near unit. Check for
damage.
2. Install the Rear Base Log on pegs on the rear skirt. Fig. 27.
Figure 27. Rear Base Log
3. Install the Front Base Log on its pegs. Fig. 28.
4. Install the Front Left Log . Fig. 29.
Figure 28. Front Base Log
Figure 29. Front Left Log
139177_Rev_C July 11, 2010
21