S e t t i n g t h e P r i n t C o n t r a s t
The print contrast controls the darkness of the printing on your supply. The
range is -699 to +699 and the default is 0. You may need to increase the
print contrast for linerless supplies. Having the correct print contrast setting
is important because it affects how well your bar codes scan and how long
your printhead lasts. You can use a verifier to check the bar code print
quality.
Canc el All
Prin t Mode
S upp ly
Contrast
High contrast settings may
require additional printhead cleaning.
create bar code growth, leading to reduced scanning.
CAUTION:
Setting the print contrast higher than 399 reduces the printhead
warranty to 100,000 inches and may damage the printhead.
1. From the Main Menu, press or until you see
MAIN MENU
Setup
2. Press Enter/Pause. You will be at the Setup menu. Press or until
you see
SETUP
Contrast
3. Press Enter/Pause. The current setting is displayed, for example:
Enter contrast
[-699/+699]: +0
4. Press or to change the contrast. Pressing darkens the print;
lightens the print.
4-20 Operator's Handbook
Main Menu
Batch Entry
Repeat
B a tch
D e fau lts
N e two rk
B a tch
S e tup
Op tions
Port
F la sh
Settings
Memory
S cripts
D ia gno stic s
Verifier
R F ID